Laptop Tri Screen Extender

How to Set up A Trio Portable Monitor for Enhanced Screen Extension?

How to Set up A Trio Portable Monitor for Enhanced Screen Extension?


Did you ever wish to extend your computer's screen?

You may need multiple screens to multitask and improve your work efficiency as an artist, programmer, or gamer. A triple monitor setup also comes in handy for people working in design work, editing, architecture, data entry, etc. Moreover, an increased screen space helps eliminate digital clutter and spread out your desktop a little more by placing all the apps on different screens. But how to connect 3 monitors simultaneously can be challenging. 

This guide aims to add screen to laptop for extended screen usage and supercharge your productivity. Let's explore some portable triple monitor setup ideas to manage your tasks at a desk on the go. Keep reading!

What is a Trio Portable Monitor for Laptop?

A 3 monitor setup is an extra monitor you can mount on your laptop's screen and rest on other monitors. Having a foldable design, portability gets easier. With portable monitors, it is convenient to extend a laptop's screen, unlike a TV or computer monitor. 

When you connect your laptop to 3 monitors, screen extension can further benefit you in various aspects. 

#1. A better work experience

Multiple monitors provide a more expansive view during meetings, especially during WFH, for a more immersive experience. 

#2. A high-resolution screen 

Multiple monitors offer more screen space, especially if you are working on a complex project to track numerous programs on a single screen.

#3. Enhanced work productivity 

The more screens, the better the work productivity. Some users find it convenient to work with multiple screens to get all the necessary information simultaneously without switching between tabs or various programs. Extra monitors also help to conduct research if you work with data. 

How to Set up a Trio Portable Monitor for Laptop?

After knowing the multiple benefits of a triple Monitor setup, let's see how to hook up Monitor to laptop through the steps mentioned below.

Checking Compatibility and Requirements

Firstly, before you begin with your triple monitor setup, you must verify Trio monitor compatibility with your laptop or device and ensure you have the necessary cables and adapters. You can verify the compatibility on your laptop manufacturer's website. 

A Trio Monitor is 12.5 inches with a 12.8" x 8.6" x 0.5" dimension. On the contrary, Trio Max Monitor is 14 inches with a 14.1" x 9.5" x 0.5" dimension. Both Monitors are compatible with Android, Chrome, Mac, Linux, and Windows devices. 

Also, check if your laptop has sufficient ports, like the USB and HDMI ports, with the correct cords to add screen to laptop. In case they are absent, you must get an adapter cable. Ensure your device has at least two video port cords for connection to other monitors. 

Preparing Your Laptop or Device

Check graphics settings and drivers for multiple displays. Update your graphic drivers to boost your laptop's speed and attain a high resolution for a smooth flow in your triple monitor setup experience. Either install an update manually or auto-update the system once a better version is available. If nothing works, buy a new graphics card that fits the requirement.

Ensure your laptop's power settings are optimized for dual-screen usage. You must;

  • Dim the screen brightness
  • Or, go to the Power settings and make necessary adjustments by putting it in Performance mode or Battery Saving mode

Physical Setup of the Trio Portable Monitor

Now unbox and inspect the Trio monitor. Generally, a Trio portable monitor comes with a screen with interchangeable USB Type-C ports. It includes 12 metal plates for three laptops USB Cable, i.e., USB Type-C cable to Type A, USB Type-C cable to Type C, and Trio/Trio Max clip.

Connect the Monitor to your laptop or device using USB or HDMI connection (whichever is applicable) and position the Trio monitor alongside your laptop screen.

Windows Installation Guide

Connect the Windows laptop to the Trio/Trio Max monitor and wait for a few seconds until the Monitor turns on. If it does not, visit the Maxfree official  page to install the correct system driver.

Mac Installation Guide 

Ensure not to put the triple Monitor setup into your Mac before executing the driver installation. Download the Mac driver from the Maxfree official page, run the .dmg file to load the correct drivers, and follow the instructions.

Note: Download the Maxfree driver depending on your system requirements and Mac version to install the correct drivers. 

Monitor Positioning Guide

  • Place the metal plates over the magnets in the back of the Trio Portable Monitor
  • Ensure the round plate is centered on the magnet 
  • Place all the metal plates, close the laptop, and align the Trio/Trio Max monitor
  • Try to match the right edge of the Trio/Trio Max monitor with one screw exposed past the edge of the laptop.
  • Align the Trio/Trio Max's bottom of the bottom of the laptop

Now use it in Portrait by sliding Trio and rotating around 110 degrees or in Presentation mode by swiveling Trio 180 degrees to the back of the laptop. To use the 3 monitor setup, attach the clips to Trio and attach the second unit of Trio to the clips.

Configuring Display Settings

Access the display settings on your laptop or device. Set the Trio monitor as an extended display and identify the Trio monitor to adjust its resolution and orientation.

Windows Display Settings 

  • Right-click on the desktop while Trio is connected > Display Setting.
  • To change the duplicate screen to extend mode, click on Duplicate these displays from the dropdown menu.
  • Choose Extend these displays from the dropdown menu > Apply.

The default text size is 125%, and you can increase it up to 175% or decrease it to 100% using the Scale and Layout menu.

Mac Display Settings 

  • Click System Preference > Displays
  • Check the Mirror Displays box to switch between duplicate extend mode 

Once you open Displays and hold the Option key > Click Scaled to select the resolution that fits your needs. 

Alignment and Calibration

Adjust the Monitor's position and angle for comfortable viewing, and calibrate colors and brightness to match your laptop's display. 

Calibrate Monitor in Windows

  • Visit the Display settings 
  • Set the correct gamma values 
  • Set the right brightness
  • Set the proper contrast ratio 
  • Set the correct color levels 
  • Confirm your settings 

Calibrate Monitor on Mac 

  • Click on the Apple logo
  • Select System Preferences > Displays > Color tab
  • Click the Calibrate button while pressing down the Option key to open Apple Display Calibrator Assistant in Expert Mode
  • Click Continue and set up native Gamma > Continue 
  • Set up target Gamma and choose a white point
  • Configure Administrator options 
  • Name the Display profile
  • Check your Profile Summary

Final Verdict

When you add screen to laptop, your work productivity increases instantly. Using a portable triple monitor setup works wonders even during travels. But before buying one, ensure your device is compatible with the Monitor and meets the setup requirements. Then only settle for a 3 monitor setup that works best for your laptop based on size, bezels, ports, and screen resolution. Choose a Monitor setup wisely, as investing in the right one elevates your productivity and entertainment experience.


  Shop Maxfree T2 Tri Screen Extenders

Reading next

Benefits of Having a Laptop Tri Screen Extender
How To Choose The Best Tri-Screen Extender For Your Laptop

Leave a comment

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.